JUKI Quality. Customize this machine for your specific work.

1/4" Needle Gauge Standard. Larger Needle Gauge Sizes Available

Including complete stand assembly

. The two-needle machine with a thread trimmer offers basic performance that is ideally suited to sewing heavy materials. The machine utilizes a new mechanism that does not change the ratio of the alternate vertical movement of the walking foot and presser foot, even when the material thickness changes. The mechanism helps prevent slippage between the upper and lower materials even when a heavy material is used.

Industry Workhorse

LU-1560N Series 2-Needle, Unison-Feed, Lockstitch Machine with Vertical-Axis Large Hooks LU-1560N-7 (Standard Gauge with Automatic Thread Trimmers and Alternating Foot Stroke Adjusting Dial) LU-1560N (Standard Gauge) LU-1561N (Gauge for Europe LU-1561N-7 (Gauge for Europe with Automatic Thread Trimmers and Alternating Foot Stroke Adjusting Dial) LU-1565N (With Organized Split Needle Bar) The two-needle machine with a thread trimmer offers basic performance that is ideally suited to sewing heavy materials. The machine utilizes a new compound feed mechanism that does not change the ratio of the alternate vertical movement of the walking foot and presser foot, even when the material thickness changes. The mechanism helps prevent slippage between the upper and lower materials even when a heavy material is used.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering. The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches. The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. - Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with consistent pressure to prevent irregular stitches.

-The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality. With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot. The high, 16mm (13mm for LU-1565N) presser foot lift enables easy material handling.

The highly efficient vertical-axis double-capacity hook is equipped as standard With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.